netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver
@ 2021-10-22 12:06 Luo Jie
  2021-10-22 12:06 ` [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
                   ` (13 more replies)
  0 siblings, 14 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

This patch series add the qca8081 ethernet phy driver support, which
improve the wol feature, leverage at803x phy driver and add the fast
retrain, master/slave seed and CDT feature.

Changes in v4:
	* handle other interrupts in set_wol.
	* add genphy_c45_fast_retrain.

Changes in v3:
	* correct a typo "excpet".
	* remove the suffix "PHY" from phy name.

Changes in v2:
	* add definitions of fast retrain related registers in mdio.h.
	* break up the patch into small patches.
	* improve the at803x legacy code.

Changes in v1:
	* merge qca8081 phy driver into at803x.
	* add cdt feature.
	* leverage at803x phy driver helpers.

Luo Jie (14):
  net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  net: phy: at803x: use phy_modify()
  net: phy: at803x: improve the WOL feature
  net: phy: at803x: use GENMASK() for speed status
  net: phy: add qca8081 ethernet phy driver
  net: phy: add qca8081 read_status
  net: phy: add qca8081 get_features
  net: phy: add qca8081 config_aneg
  net: phy: add constants for fast retrain related register
  net: phy: add genphy_c45_fast_retrain
  net: phy: add qca8081 config_init
  net: phy: add qca8081 soft_reset and enable master/slave seed
  net: phy: adjust qca8081 master/slave seed value if link down
  net: phy: add qca8081 cdt feature

 drivers/net/phy/at803x.c  | 580 +++++++++++++++++++++++++++++++++++---
 drivers/net/phy/phy-c45.c |  34 +++
 include/linux/phy.h       |   1 +
 include/uapi/linux/mdio.h |   9 +
 4 files changed, 577 insertions(+), 47 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:13   ` Russell King (Oracle)
  2021-10-22 12:06 ` [PATCH v4 02/14] net: phy: at803x: use phy_modify() Luo Jie
                   ` (12 subsequent siblings)
  13 siblings, 1 reply; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS defined in mdio.h.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 3feee4d59030..b04fb251bacb 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -70,7 +70,6 @@
 #define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
 #define AT803X_LED_CONTROL			0x18
 
-#define AT803X_DEVICE_ADDR			0x03
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
@@ -330,7 +329,8 @@ static int at803x_set_wol(struct phy_device *phydev,
 	const u8 *mac;
 	int ret;
 	u32 value;
-	unsigned int i, offsets[] = {
+	unsigned int i;
+	const unsigned int offsets[] = {
 		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
 		AT803X_LOC_MAC_ADDR_16_31_OFFSET,
 		AT803X_LOC_MAC_ADDR_0_15_OFFSET,
@@ -346,7 +346,7 @@ static int at803x_set_wol(struct phy_device *phydev,
 			return -EINVAL;
 
 		for (i = 0; i < 3; i++)
-			phy_write_mmd(phydev, AT803X_DEVICE_ADDR, offsets[i],
+			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
 				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
 
 		value = phy_read(phydev, AT803X_INTR_ENABLE);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 02/14] net: phy: at803x: use phy_modify()
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
  2021-10-22 12:06 ` [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:15   ` Russell King (Oracle)
  2021-10-22 12:06 ` [PATCH v4 03/14] net: phy: at803x: improve the WOL feature Luo Jie
                   ` (11 subsequent siblings)
  13 siblings, 1 reply; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Convert at803x_set_wol to use phy_modify.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index b04fb251bacb..19011c16a1da 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -349,16 +349,12 @@ static int at803x_set_wol(struct phy_device *phydev,
 			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
 				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
 
-		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value |= AT803X_INTR_ENABLE_WOL;
-		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
 		if (ret)
 			return ret;
 		value = phy_read(phydev, AT803X_INTR_STATUS);
 	} else {
-		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value &= (~AT803X_INTR_ENABLE_WOL);
-		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
 		if (ret)
 			return ret;
 		value = phy_read(phydev, AT803X_INTR_STATUS);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 03/14] net: phy: at803x: improve the WOL feature
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
  2021-10-22 12:06 ` [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
  2021-10-22 12:06 ` [PATCH v4 02/14] net: phy: at803x: use phy_modify() Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 04/14] net: phy: at803x: use GENMASK() for speed status Luo Jie
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

The wol feature is controlled by the MMD3.8012 bit5,
need to set this bit when the wol function is enabled.

The reg18 bit0 is for enabling WOL interrupt, when wol
occurs, the wol interrupt status reg19 bit0 is set to 1.

Call phy_trigger_machine if there are any other interrupt
pending in the function set_wol.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 45 +++++++++++++++++++++++++++++++++-------
 1 file changed, 38 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 19011c16a1da..32fecb260379 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -70,6 +70,8 @@
 #define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
 #define AT803X_LED_CONTROL			0x18
 
+#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
+#define AT803X_WOL_EN				BIT(5)
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
@@ -327,8 +329,7 @@ static int at803x_set_wol(struct phy_device *phydev,
 {
 	struct net_device *ndev = phydev->attached_dev;
 	const u8 *mac;
-	int ret;
-	u32 value;
+	int ret, irq_enabled;
 	unsigned int i;
 	const unsigned int offsets[] = {
 		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
@@ -349,18 +350,45 @@ static int at803x_set_wol(struct phy_device *phydev,
 			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
 				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
 
+		/* Enable WOL function */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
+				0, AT803X_WOL_EN);
+		if (ret)
+			return ret;
+		/* Enable WOL interrupt */
 		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
 		if (ret)
 			return ret;
-		value = phy_read(phydev, AT803X_INTR_STATUS);
 	} else {
+		/* Disable WoL function */
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
+				AT803X_WOL_EN, 0);
+		if (ret)
+			return ret;
+		/* Disable WOL interrupt */
 		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
 		if (ret)
 			return ret;
-		value = phy_read(phydev, AT803X_INTR_STATUS);
 	}
 
-	return ret;
+	/* Clear WOL status */
+	ret = phy_read(phydev, AT803X_INTR_STATUS);
+	if (ret < 0)
+		return ret;
+
+	/* Check if there are other interrupts except for WOL triggered when PHY is
+	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
+	 * be passed up to the interrupt PIN.
+	 */
+	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
+	if (irq_enabled < 0)
+		return irq_enabled;
+
+	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
+	if (ret & irq_enabled && !phy_polling_mode(phydev))
+		phy_trigger_machine(phydev);
+
+	return 0;
 }
 
 static void at803x_get_wol(struct phy_device *phydev,
@@ -371,8 +399,11 @@ static void at803x_get_wol(struct phy_device *phydev,
 	wol->supported = WAKE_MAGIC;
 	wol->wolopts = 0;
 
-	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (value & AT803X_INTR_ENABLE_WOL)
+	value = phy_read_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL);
+	if (value < 0)
+		return;
+
+	if (value & AT803X_WOL_EN)
 		wol->wolopts |= WAKE_MAGIC;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 04/14] net: phy: at803x: use GENMASK() for speed status
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (2 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 03/14] net: phy: at803x: improve the WOL feature Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver Luo Jie
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Use GENMASK() for the current speed value.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 32fecb260379..ef21a84a3a55 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -33,10 +33,10 @@
 #define AT803X_SFC_DISABLE_JABBER		BIT(0)
 
 #define AT803X_SPECIFIC_STATUS			0x11
-#define AT803X_SS_SPEED_MASK			(3 << 14)
-#define AT803X_SS_SPEED_1000			(2 << 14)
-#define AT803X_SS_SPEED_100			(1 << 14)
-#define AT803X_SS_SPEED_10			(0 << 14)
+#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
+#define AT803X_SS_SPEED_1000			2
+#define AT803X_SS_SPEED_100			1
+#define AT803X_SS_SPEED_10			0
 #define AT803X_SS_DUPLEX			BIT(13)
 #define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
 #define AT803X_SS_MDIX				BIT(6)
@@ -986,7 +986,7 @@ static int at803x_read_status(struct phy_device *phydev)
 		if (sfc < 0)
 			return sfc;
 
-		switch (ss & AT803X_SS_SPEED_MASK) {
+		switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) {
 		case AT803X_SS_SPEED_10:
 			phydev->speed = SPEED_10;
 			break;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (3 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 04/14] net: phy: at803x: use GENMASK() for speed status Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 16:03   ` Jakub Kicinski
  2021-10-22 12:06 ` [PATCH v4 06/14] net: phy: add qca8081 read_status Luo Jie
                   ` (8 subsequent siblings)
  13 siblings, 1 reply; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

qca8081 is a single port ethernet phy chip that supports
10/100/1000/2500 Mbps mode.

Add the basic phy driver features, and reuse the at803x
phy driver functions.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index ef21a84a3a55..460881320ebb 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -156,6 +156,8 @@
 #define QCA8337_PHY_ID				0x004dd036
 #define QCA8K_PHY_ID_MASK			0xffffffff
 
+#define QCA8081_PHY_ID				0x004dd101
+
 #define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
 
 #define AT803X_PAGE_FIBER			0
@@ -165,7 +167,7 @@
 #define AT803X_KEEP_PLL_ENABLED			BIT(0)
 #define AT803X_DISABLE_SMARTEEE			BIT(1)
 
-MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
+MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
 
@@ -1480,6 +1482,18 @@ static struct phy_driver at803x_driver[] = {
 	.get_stats		= at803x_get_stats,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
+}, {
+	/* Qualcomm QCA8081 */
+	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
+	.name			= "Qualcomm QCA8081",
+	.config_intr		= at803x_config_intr,
+	.handle_interrupt	= at803x_handle_interrupt,
+	.get_tunable		= at803x_get_tunable,
+	.set_tunable		= at803x_set_tunable,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= genphy_suspend,
+	.resume			= genphy_resume,
 }, };
 
 module_phy_driver(at803x_driver);
@@ -1493,6 +1507,7 @@ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
 	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
+	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
 	{ }
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 06/14] net: phy: add qca8081 read_status
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (4 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 07/14] net: phy: add qca8081 get_features Luo Jie
                   ` (7 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

1. Separate the function at803x_read_specific_status from
the at803x_read_status, since it can be reused by the
read_status of qca8081 phy driver excepting adding the
2500M speed.

2. Add the qca8081 read_status function qca808x_read_status.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 95 ++++++++++++++++++++++++++++++----------
 1 file changed, 73 insertions(+), 22 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 460881320ebb..738f5a84cca6 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -41,6 +41,9 @@
 #define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
 #define AT803X_SS_MDIX				BIT(6)
 
+#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
+#define QCA808X_SS_SPEED_2500			4
+
 #define AT803X_INTR_ENABLE			0x12
 #define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
 #define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
@@ -951,27 +954,9 @@ static void at803x_link_change_notify(struct phy_device *phydev)
 	}
 }
 
-static int at803x_read_status(struct phy_device *phydev)
+static int at803x_read_specific_status(struct phy_device *phydev)
 {
-	int ss, err, old_link = phydev->link;
-
-	/* Update the link, but return if there was an error */
-	err = genphy_update_link(phydev);
-	if (err)
-		return err;
-
-	/* why bother the PHY if nothing can have changed */
-	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-		return 0;
-
-	phydev->speed = SPEED_UNKNOWN;
-	phydev->duplex = DUPLEX_UNKNOWN;
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
-
-	err = genphy_read_lpa(phydev);
-	if (err < 0)
-		return err;
+	int ss;
 
 	/* Read the AT8035 PHY-Specific Status register, which indicates the
 	 * speed and duplex that the PHY is actually using, irrespective of
@@ -982,13 +967,19 @@ static int at803x_read_status(struct phy_device *phydev)
 		return ss;
 
 	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
-		int sfc;
+		int sfc, speed;
 
 		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
 		if (sfc < 0)
 			return sfc;
 
-		switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) {
+		/* qca8081 takes the different bits for speed value from at803x */
+		if (phydev->drv->phy_id == QCA8081_PHY_ID)
+			speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss);
+		else
+			speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss);
+
+		switch (speed) {
 		case AT803X_SS_SPEED_10:
 			phydev->speed = SPEED_10;
 			break;
@@ -998,6 +989,9 @@ static int at803x_read_status(struct phy_device *phydev)
 		case AT803X_SS_SPEED_1000:
 			phydev->speed = SPEED_1000;
 			break;
+		case QCA808X_SS_SPEED_2500:
+			phydev->speed = SPEED_2500;
+			break;
 		}
 		if (ss & AT803X_SS_DUPLEX)
 			phydev->duplex = DUPLEX_FULL;
@@ -1022,6 +1016,35 @@ static int at803x_read_status(struct phy_device *phydev)
 		}
 	}
 
+	return 0;
+}
+
+static int at803x_read_status(struct phy_device *phydev)
+{
+	int err, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	err = genphy_read_lpa(phydev);
+	if (err < 0)
+		return err;
+
+	err = at803x_read_specific_status(phydev);
+	if (err < 0)
+		return err;
+
 	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
 		phy_resolve_aneg_pause(phydev);
 
@@ -1341,6 +1364,33 @@ static int qca83xx_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
+	if (ret < 0)
+		return ret;
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
+			ret & MDIO_AN_10GBT_STAT_LP2_5G);
+
+	ret = genphy_read_status(phydev);
+	if (ret)
+		return ret;
+
+	ret = at803x_read_specific_status(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->link && phydev->speed == SPEED_2500)
+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+	else
+		phydev->interface = PHY_INTERFACE_MODE_SMII;
+
+	return 0;
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* Qualcomm Atheros AR8035 */
@@ -1494,6 +1544,7 @@ static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
+	.read_status		= qca808x_read_status,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 07/14] net: phy: add qca8081 get_features
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (5 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 06/14] net: phy: add qca8081 read_status Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 08/14] net: phy: add qca8081 config_aneg Luo Jie
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Reuse the at803x phy driver get_features excepting
adding 2500M capability.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 738f5a84cca6..987497e39e50 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -736,6 +736,15 @@ static int at803x_get_features(struct phy_device *phydev)
 	if (err)
 		return err;
 
+	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
+		err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
+		if (err < 0)
+			return err;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
+				err & MDIO_PMA_NG_EXTABLE_2_5GBT);
+	}
+
 	if (phydev->drv->phy_id != ATH8031_PHY_ID)
 		return 0;
 
@@ -1542,6 +1551,7 @@ static struct phy_driver at803x_driver[] = {
 	.set_tunable		= at803x_set_tunable,
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
+	.get_features		= at803x_get_features,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 08/14] net: phy: add qca8081 config_aneg
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (6 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 07/14] net: phy: add qca8081 get_features Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 09/14] net: phy: add constants for fast retrain related register Luo Jie
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Reuse at803x phy driver config_aneg excepting
adding 2500M auto-negotiation.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 987497e39e50..8d230e4fd1a3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1101,7 +1101,30 @@ static int at803x_config_aneg(struct phy_device *phydev)
 			return ret;
 	}
 
-	return genphy_config_aneg(phydev);
+	/* Do not restart auto-negotiation by setting ret to 0 defautly,
+	 * when calling __genphy_config_aneg later.
+	 */
+	ret = 0;
+
+	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
+		int phy_ctrl = 0;
+
+		/* The reg MII_BMCR also needs to be configured for force mode, the
+		 * genphy_config_aneg is also needed.
+		 */
+		if (phydev->autoneg == AUTONEG_DISABLE)
+			genphy_c45_pma_setup_forced(phydev);
+
+		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
+			phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
+
+		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return __genphy_config_aneg(phydev, ret);
 }
 
 static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
@@ -1552,6 +1575,7 @@ static struct phy_driver at803x_driver[] = {
 	.set_wol		= at803x_set_wol,
 	.get_wol		= at803x_get_wol,
 	.get_features		= at803x_get_features,
+	.config_aneg		= at803x_config_aneg,
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 09/14] net: phy: add constants for fast retrain related register
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (7 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 08/14] net: phy: add qca8081 config_aneg Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 10/14] net: phy: add genphy_c45_fast_retrain Luo Jie
                   ` (4 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Add the constants for 2.5G fast retrain capability
in 10G AN control register, fast retrain status and
control register and THP bypass register into mdio.h.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 include/uapi/linux/mdio.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index bdf77dffa5a4..c54e6eae5366 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -53,12 +53,14 @@
 #define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
 #define MDIO_AN_EEE_ADV2	62	/* EEE advertisement 2 */
 #define MDIO_AN_EEE_LPABLE2	63	/* EEE link partner ability 2 */
+#define MDIO_AN_CTRL2		64	/* AN THP bypass request control */
 
 /* Media-dependent registers. */
 #define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
 #define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
 #define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
 					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FSRT_CSR	147	/* 10GBASE-R fast retrain status and control */
 #define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
 #define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
 #define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
@@ -239,6 +241,9 @@
 #define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
 #define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
 
+/* PMA 10GBASE-R Fast Retrain status and control register. */
+#define MDIO_PMA_10GBR_FSRT_ENABLE	0x0001	/* Fast retrain enable */
+
 /* PCS 10GBASE-R/-T status register 1. */
 #define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
 
@@ -247,6 +252,7 @@
 #define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
 
 /* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADVFSRT2_5G	0x0020	/* Advertise 2.5GBASE-T fast retrain */
 #define MDIO_AN_10GBT_CTRL_ADV2_5G	0x0080	/* Advertise 2.5GBASE-T */
 #define MDIO_AN_10GBT_CTRL_ADV5G	0x0100	/* Advertise 5GBASE-T */
 #define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
@@ -289,6 +295,9 @@
 #define MDIO_EEE_2_5GT		0x0001	/* 2.5GT EEE cap */
 #define MDIO_EEE_5GT		0x0002	/* 5GT EEE cap */
 
+/* AN MultiGBASE-T AN control 2 */
+#define MDIO_AN_THP_BP2_5GT	0x0008	/* 2.5GT THP bypass request */
+
 /* 2.5G/5G Extended abilities register. */
 #define MDIO_PMA_NG_EXTABLE_2_5GBT	0x0001	/* 2.5GBASET ability */
 #define MDIO_PMA_NG_EXTABLE_5GBT	0x0002	/* 5GBASET ability */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 10/14] net: phy: add genphy_c45_fast_retrain
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (8 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 09/14] net: phy: add constants for fast retrain related register Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 11/14] net: phy: add qca8081 config_init Luo Jie
                   ` (3 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Add generic fast retrain auto-negotiation function for C45 PHYs.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/phy-c45.c | 34 ++++++++++++++++++++++++++++++++++
 include/linux/phy.h       |  1 +
 2 files changed, 35 insertions(+)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index c617dbcad6ea..b01180e1f578 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -611,6 +611,40 @@ int genphy_c45_loopback(struct phy_device *phydev, bool enable)
 }
 EXPORT_SYMBOL_GPL(genphy_c45_loopback);
 
+/**
+ * genphy_c45_fast_retrain - configure fast retrain registers
+ * @phydev: target phy_device struct
+ *
+ * Description: If fast-retrain is enabled, we configure PHY as
+ *   advertising fast retrain capable and THP Bypass Request, then
+ *   enable fast retrain. If it is not enabled, we configure fast
+ *   retrain disabled.
+ */
+int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable)
+{
+	int ret;
+
+	if (!enable)
+		return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR,
+				MDIO_PMA_10GBR_FSRT_ENABLE);
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				MDIO_AN_10GBT_CTRL_ADVFSRT2_5G);
+		if (ret)
+			return ret;
+
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_CTRL2,
+				MDIO_AN_THP_BP2_5GT);
+		if (ret)
+			return ret;
+	}
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR,
+			MDIO_PMA_10GBR_FSRT_ENABLE);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_fast_retrain);
+
 struct phy_driver genphy_c45_driver = {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 736e1d1a47c4..04e90423fa88 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1584,6 +1584,7 @@ int genphy_c45_config_aneg(struct phy_device *phydev);
 int genphy_c45_loopback(struct phy_device *phydev, bool enable);
 int genphy_c45_pma_resume(struct phy_device *phydev);
 int genphy_c45_pma_suspend(struct phy_device *phydev);
+int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable);
 
 /* Generic C45 PHY driver */
 extern struct phy_driver genphy_c45_driver;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 11/14] net: phy: add qca8081 config_init
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (9 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 10/14] net: phy: add genphy_c45_fast_retrain Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed Luo Jie
                   ` (2 subsequent siblings)
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

Add the qca8081 phy driver config_init function, which includes:
1. Enable fast restrain.
2. Add 802.3az configurations.
3. Initialize ADC threshold as 100mv.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 107 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 8d230e4fd1a3..3096ed51dbae 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -170,6 +170,51 @@
 #define AT803X_KEEP_PLL_ENABLED			BIT(0)
 #define AT803X_DISABLE_SMARTEEE			BIT(1)
 
+/* ADC threshold */
+#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
+#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
+#define QCA808X_ADC_THRESHOLD_80MV		0
+#define QCA808X_ADC_THRESHOLD_100MV		0xf0
+#define QCA808X_ADC_THRESHOLD_200MV		0x0f
+#define QCA808X_ADC_THRESHOLD_300MV		0xff
+
+/* CLD control */
+#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
+#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
+#define QCA808X_8023AZ_AFE_EN			0x90
+
+/* AZ control */
+#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
+#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
+#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
+#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
+#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
+
+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
+#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
+
+#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
+#define QCA808X_TOP_OPTION1_DATA		0x0
+
+#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
+#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
+#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
+#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
+#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
+#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
+#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
+#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
+#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
+#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
+#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
+#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1396,6 +1441,67 @@ static int qca83xx_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable fast retrain */
+	ret = genphy_c45_fast_retrain(phydev, true);
+	if (ret)
+		return ret;
+
+	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
+			QCA808X_TOP_OPTION1_DATA);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
+			QCA808X_MSE_THRESHOLD_20DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
+			QCA808X_MSE_THRESHOLD_17DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
+			QCA808X_MSE_THRESHOLD_27DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
+			QCA808X_MSE_THRESHOLD_28DB_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
+			QCA808X_MMD3_DEBUG_1_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
+			QCA808X_MMD3_DEBUG_4_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
+			QCA808X_MMD3_DEBUG_5_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
+			QCA808X_MMD3_DEBUG_3_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
+			QCA808X_MMD3_DEBUG_6_VALUE);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
+			QCA808X_MMD3_DEBUG_2_VALUE);
+
+	return 0;
+}
+
+static int qca808x_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Active adc&vga on 802.3az for the link 1000M and 100M */
+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
+			QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
+	if (ret)
+		return ret;
+
+	/* Adjust the threshold on 802.3az for the link 1000M */
+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+			QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, QCA808X_MMD3_AZ_TRAINING_VAL);
+	if (ret)
+		return ret;
+
+	/* Config the fast retrain for the link 2500M */
+	ret = qca808x_phy_fast_retrain_config(phydev);
+	if (ret)
+		return ret;
+
+	/* Configure adc threshold as 100mv for the link 10M */
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
+			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
+}
+
 static int qca808x_read_status(struct phy_device *phydev)
 {
 	int ret;
@@ -1579,6 +1685,7 @@ static struct phy_driver at803x_driver[] = {
 	.suspend		= genphy_suspend,
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,
+	.config_init		= qca808x_config_init,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (10 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 11/14] net: phy: add qca8081 config_init Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 13/14] net: phy: adjust qca8081 master/slave seed value if link down Luo Jie
  2021-10-22 12:06 ` [PATCH v4 14/14] net: phy: add qca8081 cdt feature Luo Jie
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

qca8081 phy is a single port phy, configure
phy the lower seed value to make it linked as slave
mode easier.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 48 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 3096ed51dbae..f372f6ab78f6 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -215,6 +215,12 @@
 #define QCA808X_PHY_MMD3_DEBUG_6		0xa011
 #define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
 
+/* master/slave seed config */
+#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
+#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
+#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
+#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1476,6 +1482,26 @@ static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev)
+{
+	u16 seed_value = (prandom_u32() % QCA808X_MASTER_SLAVE_SEED_RANGE);
+
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+			QCA808X_MASTER_SLAVE_SEED_CFG,
+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value));
+}
+
+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
+{
+	u16 seed_enable = 0;
+
+	if (enable)
+		seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE;
+
+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
+			QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable);
+}
+
 static int qca808x_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -1497,6 +1523,16 @@ static int qca808x_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
+	/* Configure lower ramdom seed to make phy linked as slave mode */
+	ret = qca808x_phy_ms_random_seed_set(phydev);
+	if (ret)
+		return ret;
+
+	/* Enable seed */
+	ret = qca808x_phy_ms_seed_enable(phydev, true);
+	if (ret)
+		return ret;
+
 	/* Configure adc threshold as 100mv for the link 10M */
 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
 			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
@@ -1529,6 +1565,17 @@ static int qca808x_read_status(struct phy_device *phydev)
 	return 0;
 }
 
+static int qca808x_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_soft_reset(phydev);
+	if (ret < 0)
+		return ret;
+
+	return qca808x_phy_ms_seed_enable(phydev, true);
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* Qualcomm Atheros AR8035 */
@@ -1686,6 +1733,7 @@ static struct phy_driver at803x_driver[] = {
 	.resume			= genphy_resume,
 	.read_status		= qca808x_read_status,
 	.config_init		= qca808x_config_init,
+	.soft_reset		= qca808x_soft_reset,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 13/14] net: phy: adjust qca8081 master/slave seed value if link down
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (11 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  2021-10-22 12:06 ` [PATCH v4 14/14] net: phy: add qca8081 cdt feature Luo Jie
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

1. The master/slave seed needs to be updated when the link can't
be created.

2. The case where two qca8081 PHYs are connected each other and
master/slave seed is generated as the same value also needs
to be considered, so adding this code change into read_status
instead of link_change_notify.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f372f6ab78f6..227b97639987 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1562,6 +1562,22 @@ static int qca808x_read_status(struct phy_device *phydev)
 	else
 		phydev->interface = PHY_INTERFACE_MODE_SMII;
 
+	/* generate seed as a lower random value to make PHY linked as SLAVE easily,
+	 * except for master/slave configuration fault detected.
+	 * the reason for not putting this code into the function link_change_notify is
+	 * the corner case where the link partner is also the qca8081 PHY and the seed
+	 * value is configured as the same value, the link can't be up and no link change
+	 * occurs.
+	 */
+	if (!phydev->link) {
+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
+			qca808x_phy_ms_seed_enable(phydev, false);
+		} else {
+			qca808x_phy_ms_random_seed_set(phydev);
+			qca808x_phy_ms_seed_enable(phydev, true);
+		}
+	}
+
 	return 0;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* [PATCH v4 14/14] net: phy: add qca8081 cdt feature
  2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
                   ` (12 preceding siblings ...)
  2021-10-22 12:06 ` [PATCH v4 13/14] net: phy: adjust qca8081 master/slave seed value if link down Luo Jie
@ 2021-10-22 12:06 ` Luo Jie
  13 siblings, 0 replies; 22+ messages in thread
From: Luo Jie @ 2021-10-22 12:06 UTC (permalink / raw)
  To: andrew, hkallweit1, linux, davem, kuba
  Cc: netdev, linux-kernel, sricharan, Luo Jie

To perform CDT of qca8081 phy:
1. disable hibernation.
2. force phy working in MDI mode.
3. force phy working in 1000BASE-T mode.
4. configure the related thresholds.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 194 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 191 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 227b97639987..822ca7846046 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -221,6 +221,32 @@
 #define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
 #define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
 
+/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
+ * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
+ */
+#define QCA808X_DBG_AN_TEST			0xb
+#define QCA808X_HIBERNATION_EN			BIT(15)
+
+#define QCA808X_CDT_ENABLE_TEST			BIT(15)
+#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
+#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
+
+#define QCA808X_MMD3_CDT_STATUS			0x8064
+#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
+#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
+#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
+#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
+#define QCA808X_CDT_DIAG_LENGTH			GENMASK(7, 0)
+
+#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
+#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
+#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
+#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL		0
+#define QCA808X_CDT_STATUS_STAT_NORMAL		1
+#define QCA808X_CDT_STATUS_STAT_OPEN		2
+#define QCA808X_CDT_STATUS_STAT_SHORT		3
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1311,8 +1337,14 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
 {
 	u16 cdt;
 
-	cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
-	      AT803X_CDT_ENABLE_TEST;
+	/* qca8081 takes the different bit 15 to enable CDT test */
+	if (phydev->drv->phy_id == QCA8081_PHY_ID)
+		cdt = QCA808X_CDT_ENABLE_TEST |
+			QCA808X_CDT_LENGTH_UNIT |
+			QCA808X_CDT_INTER_CHECK_DIS;
+	else
+		cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
+			AT803X_CDT_ENABLE_TEST;
 
 	return phy_write(phydev, AT803X_CDT, cdt);
 }
@@ -1320,10 +1352,16 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
 static int at803x_cdt_wait_for_completion(struct phy_device *phydev)
 {
 	int val, ret;
+	u16 cdt_en;
+
+	if (phydev->drv->phy_id == QCA8081_PHY_ID)
+		cdt_en = QCA808X_CDT_ENABLE_TEST;
+	else
+		cdt_en = AT803X_CDT_ENABLE_TEST;
 
 	/* One test run takes about 25ms */
 	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
-				    !(val & AT803X_CDT_ENABLE_TEST),
+				    !(val & cdt_en),
 				    30000, 100000, true);
 
 	return ret < 0 ? ret : 0;
@@ -1592,6 +1630,153 @@ static int qca808x_soft_reset(struct phy_device *phydev)
 	return qca808x_phy_ms_seed_enable(phydev, true);
 }
 
+static bool qca808x_cdt_fault_length_valid(int cdt_code)
+{
+	switch (cdt_code) {
+	case QCA808X_CDT_STATUS_STAT_SHORT:
+	case QCA808X_CDT_STATUS_STAT_OPEN:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int qca808x_cable_test_result_trans(int cdt_code)
+{
+	switch (cdt_code) {
+	case QCA808X_CDT_STATUS_STAT_NORMAL:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case QCA808X_CDT_STATUS_STAT_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case QCA808X_CDT_STATUS_STAT_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case QCA808X_CDT_STATUS_STAT_FAIL:
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
+{
+	int val;
+	u32 cdt_length_reg = 0;
+
+	switch (pair) {
+	case ETHTOOL_A_CABLE_PAIR_A:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_B:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_C:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_D:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
+	if (val < 0)
+		return val;
+
+	return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10;
+}
+
+static int qca808x_cable_test_start(struct phy_device *phydev)
+{
+	int ret;
+
+	/* perform CDT with the following configs:
+	 * 1. disable hibernation.
+	 * 2. force PHY working in MDI mode.
+	 * 3. for PHY working in 1000BaseT.
+	 * 4. configure the threshold.
+	 */
+
+	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
+	if (ret < 0)
+		return ret;
+
+	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
+	phydev->duplex = DUPLEX_FULL;
+	phydev->speed = SPEED_1000;
+	ret = genphy_c45_pma_setup_forced(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = genphy_setup_forced(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* configure the thresholds for open, short, pair ok test */
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
+
+	return 0;
+}
+
+static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+	int ret, val;
+	int pair_a, pair_b, pair_c, pair_d;
+
+	*finished = false;
+
+	ret = at803x_cdt_start(phydev, 0);
+	if (ret)
+		return ret;
+
+	ret = at803x_cdt_wait_for_completion(phydev);
+	if (ret)
+		return ret;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
+	if (val < 0)
+		return val;
+
+	pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
+	pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
+	pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
+	pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
+
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+				qca808x_cable_test_result_trans(pair_a));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+				qca808x_cable_test_result_trans(pair_b));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
+				qca808x_cable_test_result_trans(pair_c));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
+				qca808x_cable_test_result_trans(pair_d));
+
+	if (qca808x_cdt_fault_length_valid(pair_a))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A));
+	if (qca808x_cdt_fault_length_valid(pair_b))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B));
+	if (qca808x_cdt_fault_length_valid(pair_c))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C));
+	if (qca808x_cdt_fault_length_valid(pair_d))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D));
+
+	*finished = true;
+
+	return 0;
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* Qualcomm Atheros AR8035 */
@@ -1737,6 +1922,7 @@ static struct phy_driver at803x_driver[] = {
 	/* Qualcomm QCA8081 */
 	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
 	.name			= "Qualcomm QCA8081",
+	.flags			= PHY_POLL_CABLE_TEST,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
@@ -1750,6 +1936,8 @@ static struct phy_driver at803x_driver[] = {
 	.read_status		= qca808x_read_status,
 	.config_init		= qca808x_config_init,
 	.soft_reset		= qca808x_soft_reset,
+	.cable_test_start	= qca808x_cable_test_start,
+	.cable_test_get_status	= qca808x_cable_test_get_status,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  2021-10-22 12:06 ` [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
@ 2021-10-22 12:13   ` Russell King (Oracle)
  2021-10-23  1:53     ` Jie Luo
  0 siblings, 1 reply; 22+ messages in thread
From: Russell King (Oracle) @ 2021-10-22 12:13 UTC (permalink / raw)
  To: Luo Jie; +Cc: andrew, hkallweit1, davem, kuba, netdev, linux-kernel, sricharan

On Fri, Oct 22, 2021 at 08:06:11PM +0800, Luo Jie wrote:
> Replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS defined in mdio.h.
> 
> Signed-off-by: Luo Jie <luoj@codeaurora.org>

On v3, Andrew gave you a reviewed-by. You need to carry those forward
especially if the patches have not changed.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 02/14] net: phy: at803x: use phy_modify()
  2021-10-22 12:06 ` [PATCH v4 02/14] net: phy: at803x: use phy_modify() Luo Jie
@ 2021-10-22 12:15   ` Russell King (Oracle)
  2021-10-23  1:54     ` Jie Luo
  0 siblings, 1 reply; 22+ messages in thread
From: Russell King (Oracle) @ 2021-10-22 12:15 UTC (permalink / raw)
  To: Luo Jie; +Cc: andrew, hkallweit1, davem, kuba, netdev, linux-kernel, sricharan

On Fri, Oct 22, 2021 at 08:06:12PM +0800, Luo Jie wrote:
> Convert at803x_set_wol to use phy_modify.
> 
> Signed-off-by: Luo Jie <luoj@codeaurora.org>

On v3, Andrew gave you a reviewed-by. You need to carry that forward
especially if nothing has changed.

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver
  2021-10-22 12:06 ` [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver Luo Jie
@ 2021-10-22 16:03   ` Jakub Kicinski
  2021-10-23  1:55     ` Jie Luo
  0 siblings, 1 reply; 22+ messages in thread
From: Jakub Kicinski @ 2021-10-22 16:03 UTC (permalink / raw)
  To: Luo Jie; +Cc: andrew, hkallweit1, linux, davem, netdev, linux-kernel, sricharan

On Fri, 22 Oct 2021 20:06:15 +0800 Luo Jie wrote:
> qca8081 is a single port ethernet phy chip that supports
> 10/100/1000/2500 Mbps mode.
> 
> Add the basic phy driver features, and reuse the at803x
> phy driver functions.
> 
> Signed-off-by: Luo Jie <luoj@codeaurora.org>

Does not apply cleanly to net-next/master. Please rebase and repost.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  2021-10-22 12:13   ` Russell King (Oracle)
@ 2021-10-23  1:53     ` Jie Luo
  2021-10-23  8:19       ` Russell King (Oracle)
  0 siblings, 1 reply; 22+ messages in thread
From: Jie Luo @ 2021-10-23  1:53 UTC (permalink / raw)
  To: Russell King (Oracle), Luo Jie
  Cc: andrew, hkallweit1, davem, kuba, netdev, linux-kernel, sricharan


On 10/22/2021 8:13 PM, Russell King (Oracle) wrote:
> On Fri, Oct 22, 2021 at 08:06:11PM +0800, Luo Jie wrote:
>> Replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS defined in mdio.h.
>>
>> Signed-off-by: Luo Jie <luoj@codeaurora.org>
> On v3, Andrew gave you a reviewed-by. You need to carry those forward
> especially if the patches have not changed.
>
> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Thanks Russell for this reminder, will follow it.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 02/14] net: phy: at803x: use phy_modify()
  2021-10-22 12:15   ` Russell King (Oracle)
@ 2021-10-23  1:54     ` Jie Luo
  0 siblings, 0 replies; 22+ messages in thread
From: Jie Luo @ 2021-10-23  1:54 UTC (permalink / raw)
  To: Russell King (Oracle), Luo Jie
  Cc: andrew, hkallweit1, davem, kuba, netdev, linux-kernel, sricharan


On 10/22/2021 8:15 PM, Russell King (Oracle) wrote:
> On Fri, Oct 22, 2021 at 08:06:12PM +0800, Luo Jie wrote:
>> Convert at803x_set_wol to use phy_modify.
>>
>> Signed-off-by: Luo Jie <luoj@codeaurora.org>
> On v3, Andrew gave you a reviewed-by. You need to carry that forward
> especially if nothing has changed.
>
> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Thanks Russell for this comments, will follow it.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver
  2021-10-22 16:03   ` Jakub Kicinski
@ 2021-10-23  1:55     ` Jie Luo
  0 siblings, 0 replies; 22+ messages in thread
From: Jie Luo @ 2021-10-23  1:55 UTC (permalink / raw)
  To: Jakub Kicinski, Luo Jie
  Cc: andrew, hkallweit1, linux, davem, netdev, linux-kernel, sricharan


On 10/23/2021 12:03 AM, Jakub Kicinski wrote:
> On Fri, 22 Oct 2021 20:06:15 +0800 Luo Jie wrote:
>> qca8081 is a single port ethernet phy chip that supports
>> 10/100/1000/2500 Mbps mode.
>>
>> Add the basic phy driver features, and reuse the at803x
>> phy driver functions.
>>
>> Signed-off-by: Luo Jie <luoj@codeaurora.org>
> Does not apply cleanly to net-next/master. Please rebase and repost.
Thanks Jakub for the comments, will update the tree and repost it.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  2021-10-23  1:53     ` Jie Luo
@ 2021-10-23  8:19       ` Russell King (Oracle)
  0 siblings, 0 replies; 22+ messages in thread
From: Russell King (Oracle) @ 2021-10-23  8:19 UTC (permalink / raw)
  To: Jie Luo
  Cc: Luo Jie, andrew, hkallweit1, davem, kuba, netdev, linux-kernel,
	sricharan

On Sat, Oct 23, 2021 at 09:53:15AM +0800, Jie Luo wrote:
> 
> On 10/22/2021 8:13 PM, Russell King (Oracle) wrote:
> > On Fri, Oct 22, 2021 at 08:06:11PM +0800, Luo Jie wrote:
> > > Replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS defined in mdio.h.
> > > 
> > > Signed-off-by: Luo Jie <luoj@codeaurora.org>
> > On v3, Andrew gave you a reviewed-by. You need to carry those forward
> > especially if the patches have not changed.
> > 
> > Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Thanks Russell for this reminder, will follow it.

But, from what I can tell, you still haven't followed it in your v5
posting either.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2021-10-23  8:27 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-22 12:06 [PATCH v4 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
2021-10-22 12:06 ` [PATCH v4 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
2021-10-22 12:13   ` Russell King (Oracle)
2021-10-23  1:53     ` Jie Luo
2021-10-23  8:19       ` Russell King (Oracle)
2021-10-22 12:06 ` [PATCH v4 02/14] net: phy: at803x: use phy_modify() Luo Jie
2021-10-22 12:15   ` Russell King (Oracle)
2021-10-23  1:54     ` Jie Luo
2021-10-22 12:06 ` [PATCH v4 03/14] net: phy: at803x: improve the WOL feature Luo Jie
2021-10-22 12:06 ` [PATCH v4 04/14] net: phy: at803x: use GENMASK() for speed status Luo Jie
2021-10-22 12:06 ` [PATCH v4 05/14] net: phy: add qca8081 ethernet phy driver Luo Jie
2021-10-22 16:03   ` Jakub Kicinski
2021-10-23  1:55     ` Jie Luo
2021-10-22 12:06 ` [PATCH v4 06/14] net: phy: add qca8081 read_status Luo Jie
2021-10-22 12:06 ` [PATCH v4 07/14] net: phy: add qca8081 get_features Luo Jie
2021-10-22 12:06 ` [PATCH v4 08/14] net: phy: add qca8081 config_aneg Luo Jie
2021-10-22 12:06 ` [PATCH v4 09/14] net: phy: add constants for fast retrain related register Luo Jie
2021-10-22 12:06 ` [PATCH v4 10/14] net: phy: add genphy_c45_fast_retrain Luo Jie
2021-10-22 12:06 ` [PATCH v4 11/14] net: phy: add qca8081 config_init Luo Jie
2021-10-22 12:06 ` [PATCH v4 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed Luo Jie
2021-10-22 12:06 ` [PATCH v4 13/14] net: phy: adjust qca8081 master/slave seed value if link down Luo Jie
2021-10-22 12:06 ` [PATCH v4 14/14] net: phy: add qca8081 cdt feature Luo Jie

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).