netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luo Jie <luoj@codeaurora.org>
To: andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
	davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	sricharan@codeaurora.org, Luo Jie <luoj@codeaurora.org>
Subject: [PATCH v7 14/14] net: phy: add qca8081 cdt feature
Date: Sun, 24 Oct 2021 16:27:38 +0800	[thread overview]
Message-ID: <20211024082738.849-15-luoj@codeaurora.org> (raw)
In-Reply-To: <20211024082738.849-1-luoj@codeaurora.org>

To perform CDT of qca8081 phy:
1. disable hibernation.
2. force phy working in MDI mode.
3. force phy working in 1000BASE-T mode.
4. configure the related thresholds.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 194 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 191 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 00733badcda5..f1cbe1f6ddec 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -229,6 +229,32 @@
 #define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
 #define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
 
+/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
+ * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
+ */
+#define QCA808X_DBG_AN_TEST			0xb
+#define QCA808X_HIBERNATION_EN			BIT(15)
+
+#define QCA808X_CDT_ENABLE_TEST			BIT(15)
+#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
+#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
+
+#define QCA808X_MMD3_CDT_STATUS			0x8064
+#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
+#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
+#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
+#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
+#define QCA808X_CDT_DIAG_LENGTH			GENMASK(7, 0)
+
+#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
+#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
+#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
+#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL		0
+#define QCA808X_CDT_STATUS_STAT_NORMAL		1
+#define QCA808X_CDT_STATUS_STAT_OPEN		2
+#define QCA808X_CDT_STATUS_STAT_SHORT		3
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1319,8 +1345,14 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
 {
 	u16 cdt;
 
-	cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
-	      AT803X_CDT_ENABLE_TEST;
+	/* qca8081 takes the different bit 15 to enable CDT test */
+	if (phydev->drv->phy_id == QCA8081_PHY_ID)
+		cdt = QCA808X_CDT_ENABLE_TEST |
+			QCA808X_CDT_LENGTH_UNIT |
+			QCA808X_CDT_INTER_CHECK_DIS;
+	else
+		cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
+			AT803X_CDT_ENABLE_TEST;
 
 	return phy_write(phydev, AT803X_CDT, cdt);
 }
@@ -1328,10 +1360,16 @@ static int at803x_cdt_start(struct phy_device *phydev, int pair)
 static int at803x_cdt_wait_for_completion(struct phy_device *phydev)
 {
 	int val, ret;
+	u16 cdt_en;
+
+	if (phydev->drv->phy_id == QCA8081_PHY_ID)
+		cdt_en = QCA808X_CDT_ENABLE_TEST;
+	else
+		cdt_en = AT803X_CDT_ENABLE_TEST;
 
 	/* One test run takes about 25ms */
 	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
-				    !(val & AT803X_CDT_ENABLE_TEST),
+				    !(val & cdt_en),
 				    30000, 100000, true);
 
 	return ret < 0 ? ret : 0;
@@ -1685,6 +1723,153 @@ static int qca808x_soft_reset(struct phy_device *phydev)
 	return qca808x_phy_ms_seed_enable(phydev, true);
 }
 
+static bool qca808x_cdt_fault_length_valid(int cdt_code)
+{
+	switch (cdt_code) {
+	case QCA808X_CDT_STATUS_STAT_SHORT:
+	case QCA808X_CDT_STATUS_STAT_OPEN:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int qca808x_cable_test_result_trans(int cdt_code)
+{
+	switch (cdt_code) {
+	case QCA808X_CDT_STATUS_STAT_NORMAL:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case QCA808X_CDT_STATUS_STAT_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case QCA808X_CDT_STATUS_STAT_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case QCA808X_CDT_STATUS_STAT_FAIL:
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
+{
+	int val;
+	u32 cdt_length_reg = 0;
+
+	switch (pair) {
+	case ETHTOOL_A_CABLE_PAIR_A:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_B:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_C:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
+		break;
+	case ETHTOOL_A_CABLE_PAIR_D:
+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
+	if (val < 0)
+		return val;
+
+	return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10;
+}
+
+static int qca808x_cable_test_start(struct phy_device *phydev)
+{
+	int ret;
+
+	/* perform CDT with the following configs:
+	 * 1. disable hibernation.
+	 * 2. force PHY working in MDI mode.
+	 * 3. for PHY working in 1000BaseT.
+	 * 4. configure the threshold.
+	 */
+
+	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
+	if (ret < 0)
+		return ret;
+
+	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
+	phydev->duplex = DUPLEX_FULL;
+	phydev->speed = SPEED_1000;
+	ret = genphy_c45_pma_setup_forced(phydev);
+	if (ret < 0)
+		return ret;
+
+	ret = genphy_setup_forced(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* configure the thresholds for open, short, pair ok test */
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
+
+	return 0;
+}
+
+static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+	int ret, val;
+	int pair_a, pair_b, pair_c, pair_d;
+
+	*finished = false;
+
+	ret = at803x_cdt_start(phydev, 0);
+	if (ret)
+		return ret;
+
+	ret = at803x_cdt_wait_for_completion(phydev);
+	if (ret)
+		return ret;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
+	if (val < 0)
+		return val;
+
+	pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
+	pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
+	pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
+	pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
+
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+				qca808x_cable_test_result_trans(pair_a));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+				qca808x_cable_test_result_trans(pair_b));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
+				qca808x_cable_test_result_trans(pair_c));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
+				qca808x_cable_test_result_trans(pair_d));
+
+	if (qca808x_cdt_fault_length_valid(pair_a))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A));
+	if (qca808x_cdt_fault_length_valid(pair_b))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B));
+	if (qca808x_cdt_fault_length_valid(pair_c))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C));
+	if (qca808x_cdt_fault_length_valid(pair_d))
+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D,
+				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D));
+
+	*finished = true;
+
+	return 0;
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* Qualcomm Atheros AR8035 */
@@ -1848,6 +2033,7 @@ static struct phy_driver at803x_driver[] = {
 	/* Qualcomm QCA8081 */
 	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
 	.name			= "Qualcomm QCA8081",
+	.flags			= PHY_POLL_CABLE_TEST,
 	.config_intr		= at803x_config_intr,
 	.handle_interrupt	= at803x_handle_interrupt,
 	.get_tunable		= at803x_get_tunable,
@@ -1861,6 +2047,8 @@ static struct phy_driver at803x_driver[] = {
 	.read_status		= qca808x_read_status,
 	.config_init		= qca808x_config_init,
 	.soft_reset		= qca808x_soft_reset,
+	.cable_test_start	= qca808x_cable_test_start,
+	.cable_test_get_status	= qca808x_cable_test_get_status,
 }, };
 
 module_phy_driver(at803x_driver);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-10-24  8:28 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-24  8:27 [PATCH v7 0/14] net: phy: Add qca8081 ethernet phy driver Luo Jie
2021-10-24  8:27 ` [PATCH v7 01/14] net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS Luo Jie
2021-10-24  8:27 ` [PATCH v7 02/14] net: phy: at803x: use phy_modify() Luo Jie
2021-10-24  8:27 ` [PATCH v7 03/14] net: phy: at803x: improve the WOL feature Luo Jie
2021-10-24 18:29   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 04/14] net: phy: at803x: use GENMASK() for speed status Luo Jie
2021-10-24  8:27 ` [PATCH v7 05/14] net: phy: add qca8081 ethernet phy driver Luo Jie
2021-10-24 18:29   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 06/14] net: phy: add qca8081 read_status Luo Jie
2021-10-24 18:30   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 07/14] net: phy: add qca8081 get_features Luo Jie
2021-10-24 18:31   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 08/14] net: phy: add qca8081 config_aneg Luo Jie
2021-10-24 18:31   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 09/14] net: phy: add constants for fast retrain related register Luo Jie
2021-10-24 18:32   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 10/14] net: phy: add genphy_c45_fast_retrain Luo Jie
2021-10-24 18:33   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 11/14] net: phy: add qca8081 config_init Luo Jie
2021-10-24 18:34   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 12/14] net: phy: add qca8081 soft_reset and enable master/slave seed Luo Jie
2021-10-24 18:40   ` Andrew Lunn
2021-10-24  8:27 ` [PATCH v7 13/14] net: phy: adjust qca8081 master/slave seed value if link down Luo Jie
2021-10-24 18:41   ` Andrew Lunn
2021-10-24  8:27 ` Luo Jie [this message]
2021-10-24 18:43   ` [PATCH v7 14/14] net: phy: add qca8081 cdt feature Andrew Lunn
2021-10-25 13:10 ` [PATCH v7 0/14] net: phy: Add qca8081 ethernet phy driver patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211024082738.849-15-luoj@codeaurora.org \
    --to=luoj@codeaurora.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=sricharan@codeaurora.org \
    --subject='Re: [PATCH v7 14/14] net: phy: add qca8081 cdt feature' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).